| |
***********************************************************************************
Acta metallurgica
sinica vol.14-2001
***********************************************************************************
No.1
1. Study on microwave dielectric properties of epoxyresin mixtures
used for rapid product development
2. Precipitation and microstructure of cr modified al3ti
3. Extraction mechanism of cerium(iv) and fluorine(i)in the separation
process of bastnasite leachsolution by cyanex 923
4. Preparation of the open pore aluminum foams usinginvestment casting
process factors influencing the wear behavior of pm steels
5. A new treatment for interface of metal anddielectric in fdtd method
6. Thermodynamic study of chromite causticfusion process
7. Crystal structure and electrochemical properties of zr(mn1-xnix)2(0.40＋x＋0.75)
hydrogen storage alloys
8. A model for bainitic transformation kinetics withparabolic nucleation
rate
9. Structural evolution of undercooled single-phaseni-2wt%pb monotectic
alloy |
|
No.2
1. A steel matrix wear resistant composite reinforced by in-situ
granular eutectics
2. Study on erosion resistance properties of o'-sialon-bn in molten
steel
3. Corrosion monitoring of ly12 in sodium chloride solution with
electrochemical noise technique
4. Quantitative characterization of stress-strain hysteresis loops
of cu-zn-al shape memory alloy
5. The effect of powerful oxygen evolution metal-oxide on the electrooxidation
of methanol
6. Differential scanning calorimetry and x-ray diffraction studies
on aging behavior of zn-al alloys
7. Deformation enhanced ferrite transformation in plain low carbon
steel
8. Computer aided analysis for cold roll forming thin channel section
9. High strain rate superplasticity of a ain particulate reinforced
6061al composite
10. Separation of thorium from ytterbium with cyanex272 by using
a hollow fiber membrane extractor
11. Three-dimensional characteristics and homogenization of electromagnetic
field in soft-contact continuous casting mold
12. Chemical pretreatments of the surface of wc-15wt%co with diamond
coatings
13. Modulated structures and ordering structures in alloying austenitic
manganese steel
14. Preparation of peroviskite-type la1-xsrxmno3 at low temperature
|
No.3
1. The relationship between pitting susceptibility and inclusions
in carbon steels in artificial seawater
2. Effects of heat treatment on the thermal expansion behavior of
sic whisker reinforced aluminum composite
3. Structure and magnetic properties of yfe12-xtix compounds
4. The application of the law of mass action in combination with the
coexistence theory of slag structure to the multicomponent slag systems
5. Study on the transport mechanism in the anode boundary layer of
welding argon arc
6. Simulation of the twin roll stainless strip casting process
7. Microstructural model of gatorized waspaloy in the isothermal forging
process
8. Experiments and simulations of a new developed forming technology-shear-extrusion
process of components with branches
9. Fractal research on cracks propagation of gas pipeline x52 steel
welding line under hydrogen environment
10. Effects of linear electromagnetic stirring on the solidification
structure of billet |
|
No.4
1. Short fatigue crack parameter based on the total crack area
2. Prediction on the thermodynamic properties of ternary liquid
alloys by modified coordination equation
3. Microstructure and tensile properties of fe3al-based alloys with
vc and tic additions
4. Microstructures and oxidation resistance of fe3al weld overlay
5. Effects of heat treatment on the microstructure of cu-zn-al (re)
shape memory alloys
6. The structure change of γ-tial irradiated by 50kev xenon ions
at room temperature
7. Temperature dependence of effective magnetic anisotropy of fe-nb-b
alloy
8. A novel parameter for evaluating the fatigue crack growth rate
in carbon steels
9. Preparation of iron carbide from magnetite pellets by co-h2 mixtures
reduction
10. Microstructure and tensile property of an as-cast duplex stainless
steel
11. A numerical model of lamellar spacing of al-si eutectic
12. Ceramic matrix composite synthesized by the pure al+naoh self-oxidation
13. Recovery of cadmium and nickel from scrap ni-cd batteries
|
| No.5
1. Precipitation hardening
in b2-ordered nial by ni2alticompound
2. Phase transformation behavior in the sputterdeposited ti-pd-ni
thin films
3. Synthesizing kinetics and micro-characterizationof spinel limn2o4
for lithium-ion batterycathode material
4. Tensile strength and creep resistance of mg-9al-1znbased alloys
with calcium addition
5. An in situ surface composite and gradient materialof al-si alloy
produced by electromagnetic force
6. Effects of high-density current pulses on workhardening behaviors
of austenite stainless steelin wire-drawing deformation
7. Microstructure evaluation of semi-solid steelmaterials in rolling
process and theresulting mechanical properties
8. Induction plasma reactive deposition of tungstencarbide from
tungsten metal powder
9. Motions of alloying additions in gas stirred ladles
10. Application of the annexation principle to the studyof thermodynamic
11. Properties of ternary metallicmelts cd-pb-sb
12. Ultrasonic separation of micro-sized inclusionsin molten metal
13. A loop drawbead restraining force model in sheetmetal deep drawing
process
14. High-temperature low cycle fatigue behavior ofnickel base superalloy
gh536
|
No.6
1. Treatment of metals, polymer films, and fabrics with a one atmosphere
uniform glow discharge plasma (oaugdp) for increased surface energy
and directional etching
2. Deposition of tibn hard films on hot-working-steel dies for aluminium
extrusion via a duplex process
3. Quantum-chemical modifications of surface:new methods for protecting
materials from corrosion
4. Crystallisation kinetics and phase transformation behaviour of
electroless nickel-phosphorus deposit with 6-9wt% phosphorus content
5. Diamond heteroepitaxy-nucleation, interface structure, film growth
6. Hot dipping aluminized coating as hydrogen permeation barrier
7. Effect of photooxidation on photoluminescence of n, n'-diphenyl-n,
n'-di(m-tolyl)-benzidine and rubrene codoped pmma thin films
8. Laser lift-off of gan thin films from sapphire substrates
9. The light induced change in transient photoconduc-tivity of polymorphous
silicon films
10. Electrochemical properties and microstructure of ir-ta-ti metal
oxide coated titanium anodes
11. High-energy proton irradiation effects on gaas/ge space solar
cells
12. Study on the properties of different activated carbon fibers and
their adsorption characteristics for formaldehyde
13. Investigation of bonding in nano-sio2 by si l2,3 x-ray absorption
near-edge structure spectroscopy
14. Interface reaction in magnetic multilayers
15. Anisotropy of (1〜 1)-surface free energies of crystals
16. Fem analysis of thermal stresses in gradient thermal barrier coatings
produced by eb-pvd
17. The improvement of electron field emission from amorphous carbon
films due to hydrogen plasma chemical annealing effect
18. Plasma model-one model of electromagnetic response of matter
19. Study of microstructure on pan-acfs prepared by different activation
methods
20. Investigation on the valence state of ce atom in bulk and nanocrystal
ceo2 by x-ray absorption and photoemission
21. Ferroelectric characteristics of srbi2ta2o9 thin films annealed
in forming gas
22. The effects of pulse bias voltage and n2 partial pressure on tiain
films of arc ion plating (aip)
23. Non-equilibrium solute segregation to austenitic grain boundary
in ferrum-nickle alloy
24. Magnetic performance transition in fe/tb multilayers induced by
interface roughness
25. Resonant photoemission of bulk ceo2 and nano-ceo2 films
26. Stochastic cracking and healing behaviors of thin films during
reaction-diffusion growth |
Click
here to order by e-mail
|
