| |
***********************************************************************************
Acta metallurgica
sinica vol.17-2004
***********************************************************************************
No.1
1. Numerical analysis of heat transfer during laser cladding to synthesize
ticp/al composite
2. Study on numerical simulation of casting thermal stresses based
on fdm
3. Nanosize effect in grain boundary migration of copper
4. Application of numerical simulation to study on thermal conduction
5. A comprehensive model of laser cladding by powder feeding
6. Quantitative analytic technology of ultra-hardness and wear resistent
surfacing material
7. Development of new thermo-mechanical
simulator
8. Numerical simulation of ultrasonic nondestructive testing for welds
9. Simulation of temperature and thermal stress field in laser milling
processing
10. The interface of ternary-boride-based hard cladding material
11. Numerical simulation of extrusion of composite powders prepared
by high energy milling
12. The interfacial behaviors of aluminum matrix composite in different
welding methods
13. Numerical simulation study on deformation uniformity of equal
cross section lateral extrusion
14. Dimensional instability of ld31 al alloy weldments at room temperature
and after thermal cycles
15. Influence of alloying elements on hydrogen diffusion using scm-dv-xα
16. Spherical microstructure formation of the semi-solid high chromium
cast iron cr20mo2
17. Computer-aid analysis for cracking of 280 connecting rod of 16v280zj
diesel locomotive on quenching process
18. Influence of so2-4 and cl- on the corrosion behavior of copper
tube in air-conditioning system
19. Synthesis of nano-zno particles for aluminum metallurgy as inert
anode material
20. Effect of brazing time on tic cermet/iron joint brazed with ag-cu-zn
filler metal
|
|
No.2
1. Improving the mechanical properties of copper alloys by thermo-mechanical
processing m.c.somani,l.p.karjalainen
2. Effect of heat
treatment on mechanical properties of 0cr12mn5ni4mo3al
3. Fatigue properties of austempered ductile iron (adi)in water
environment
4. Annexation of two kinds of solution in binary metallic melts
5. Kinetics of temper embrittlement in 2.25cr-1mo steel used for
hot-wall hydrofining reactors
6. Modeling of austenite grain size in low-alloy steel weld metal
7. A flow stress model for az61 magnesium alloy
8. Initial atmospheric corrosion of zinc in the presence of nh4cl
9. The sulfidation/oxidation resistance of two ni-cr-al-y alloys
at 700℃
10. Factors on viscosity stability of mold fluxes
11. Photodegradation of p-nitrochlorbenzene (p-ncb) using nanometer-sized
zno particles prepared by reactive evaporation method
12. Influence of surface-active elements on fluid flow of mig weldpool
13. Modeling of micromanipulation robot in virtual environment
14. Formation and change of ausn4 compounds at interface between
pbga solder ball and au/ni/cu metallization during laser and infra-red
reflow soldering
15. Investigation into hot deformation behavior of spray formed
superalloy
16. Growth process of low-temperature plasma-nitriding layer on
austenitic stainless steel
17. Freeze profile and heat balance calculation of the 160ka drained
cell
|
No.3
1. Discrepancies in the regression modelling of recrystallization
rate as using the data from physical simulation tests
2. A 2-d finite element model simulation of the melting process of
al-ti alloy in vacuum induction furnace with cold crucible(vifcc)
3. Microstructure transformation in the welding heat affected zone
of 800mpa grade ultra fine structured steel
4. Microbridge testing
of young's modulus and residual stress of nickel film electroplated
on silicon wafer
5. Mechanism analysis of thickness effect on mixed mode Ⅰ/Ⅱ fracture
of lc4-cs aluminum alloy
6. Investigation of wo3-doped tio2 film composite photocatalyst
7. Study on the stability of t' phase in the al-zn-cu ternary system
8. Effects of thermal cycle on mechanical properties and fractography
in haz of hq130 steel
9. The structure control of aluminum foams produced by powder compacted
foaming process
10. Theory deposition model and influencing factors during process
of preparing micro-layer laminate by ebpvd
11. Numerical simulation of macro-segregation in steel ingot during
solidification
12. Numerical simulation and experiment of cavity growth during superplastic
bulging of magnesium alloy zk60
13. Study on the finite element numerical simulation of sheet metal
forming
14. Extrusion die cae of the steel reinforced plastic pipe
15. Investigation on two-body wear of austenitic manganese steel through
numerical quadrature
16. Numerical simulation of controlling in titanium alloy sheets welding
residual stress by trailing peening
17. Fem simulation for laser forming processing
18. The adaptive finite element remeshing in large deformation of
metal forming
19. Interfacial debonding of frc under cyclic loading |
No.4
1. Improvement of type iv cracking resistance of 9cr heat resisting
steel weldment by boron addition
2. Application of the unified statistical material database for design
and life/risk assessment of high temperature components
3. High cycle fatigue properties of nickel-base alloy 718
4. Microscopic analysis of polycrystalline material at high temperature
5. Multiaxial creep-fatigue life evaluation under proportional loading
6. Micromechanics of the damage-induced cellular microstructure in
single crystal ni-based superalloys
7. Evaluation of creep properties for 316fr steel thick plate weldment
using miniature creep specimen
8. Development of a materials risk information platform for a safe
society
9. Development of the risk-based maintenance optimization system for
fossil power plants d.watanabe,y.chuman,n.nishimura,et al
10. Magnetic property change in an austenitic stainless steel subjected
to damage at elevated temperature - microstructure responsible for
magnetic property
11. Micro-macro damage simulation of low-alloy steel welds subject
to type iv creep failure t.igari,f.kawashima,t.tokiyoshi,et al
12. Simulation of complex thermomechanical fatigue
13. Experience with thermomechanical fatigue under service-type loading
14. Freckle formation and characterization of a ni-cr-mo-fe-w alloy
15. Failures and the life of furnace tubes
16. Influence of heat treatment on oxidation properties of c/c composites
fabricated by high pressure impregnation carbonization
17. Visco-plastic constitutive model for uniaxial and multiaxial ratcheting
at elevated temperatures
18. Fracture resistance of 3d-c/sic composites at 1300℃
19. Evaluation of the time dependent failure assessment curves for
10crmo910 and 316 ss at 550℃
20. Directionally solidified microstructure of an ultra-high temperature
nb-si-ti-hf-cr-al alloy
21. High-temperature tensile fracture behavior of directionally solidified
ni, cr, al-tac eutectic superalloy
22. Stress relaxation and reliability evaluation of soda-lime glass
23. Mechanical properties of ti3sic2 at high temperature
24. Determination and application of larson-miller parameter for heat
resistant steel 12cr1mov and 15crmo
25. Variation of substructures of pearlitic heat resistant steel after
high temperature aging
26. Effects of high temperature pretreatments on high temperature
fracture behavior of sic-c/sic
27. Numerical study of the notch effect on the creep behavior and
life of nickel-base single crystal superalloys
28. Numerical study on creep damage of composites at high temperature
29. Study on the effects of breakage of single fiber on creep behavior
of fiber reinforced composites
30. Determination of creep properties of thermal barrier coating(tbc)
systems from the indentation creep testing with round flat indenters
31. Random-fuzzy safety analysis for an aero engine turbine disk
32. Reliability analysis for an aero engine turbine disk under low
cycle fatigue condition
33. Dynamic tensile behavior of 5crmnmo at elevated temperatures
34. Effects of strain ratio on thermal-mechanical cyclic stress-strain
response and fatigue life in ds superalloy dz125
35. Characterization of thermo-mechanical fatigue properties for particulate
reinforced composites
36. Tensile stress relaxation of turbine bolt steels at high temperature
37. Microstructural characteristics and mechanical properties of spray
formed high speed steel for work roll
38. Dsc and tem study of ultra high strength aluminum alloy
39. Effect of carbon migration on creep properties of cr5mo dissimilar
welded joints with ni-based and austenitic weld metal
40. Comparison of fatigue and creep behavior between 2d and 3d-c/sic
composites
41. Microstructure and mechanical behavior of nb-(10, 15)al-20v alloys
42. On fatigue crack path deviation at elevated temperature in electron
beam repaired weldments of turbine disk
43. A potential method for determining the haz properties in welds
using two-material impression creep test
44. Investigation of the low-cycle fatigue and fatigue crack growth
behaviors of p91 base metal and weld joints
45. Remaining life assessment of a 1cr5mo steel by using z-parameter
method
46. Tensile creep deformation and damage behavior in a nickel-base
superalloy at 900℃
47. Isochronous stress-strain curves of low alloy steel cross-weld-specimen
at high temperature
48. A study of rate-dependence at elevated temperature for an al-cu-mg
alloy
|
| No.5
1. Microscopic corrosion
studies of duplex stainless steels
2. Effects of modification of the carbide characteristics through
grain boundary serration on creep-fatigue life in austenitic stainless
steels
3. Phosphorus grain boundary segregation in a p-doped 2.25cr1mo
steel
4. Study of tcp phase precipitating in gh4199 superalloy
5. Dependence of microstructure scales of eutectics on ca-si modifier
amount in austenite steel composites
6. Study on morphology of chromium in chilled cu-0.14%-2.0%cr alloys
7. Study the influence of h3bo3 on the zinc electroplating using
electrochemical noise technique
8. Preparation and xrd study of lithium deficient lib compound
9. Si-al coating on pure molybdenum substrate and its cyclic oxidation
behavior
10. The influences of solution ph and current density on coercivity
of electroplating condnimnp permanent magnetic alloy film arrays
11. Superplasticity of a water-quenched and tempered 40cr steel
12. Effect of electric field on the austenization of a low carbon
steel
13. Igniting shs by laser and its application to selective laser
sintering of metallic powder material
14. Effect of submerged entry nozzle (sen) parameters and shape
on 3-d fluid flow in mould for beam blank continuous casting
15. Formation of gradient coating of fe-based alloy with rare earths
by plasma surfacing
16. Study of preparation process of tungsten powder by shs with
a magnesium thermit stage
17. Mechanical properties in an intercritically heat-treated bainite-transformed
2%si steel
18. Study on the thermodynamics of cuo/al in situ al2o3 reinforced
al matrix composites
19. Effect of cold working on the aging properties of cu-cr-zr-mg
alloy by artificial neural network
20. Microstructural studies of friction stir welded az31 magnesium
alloy
21. Calculation of transformation volume fraction to hq590 hot rolled
strip steel during continuous cooling
22. Numerical simulation of cellular/dendritic primary spacing
23. Research on hot forming process of a retaining ring of high-nitrogen
steel
|
No.6
1. Fatigue strength determination of butt welded joints by fem
2. A mathematical heat transfer model in static and continuous casting
3. Intragranular ferrite formed in association with inclusions in
a vanadium microalloyed steel
4. Study on the mechanism of graphitization in molten cast iron promoted
by electropulse discharge
5. Surface tension of molten if steel containing ti and its interfacial
properties with solid alumina
6. Investigation on the density uniformity of pressed parts by low-voltage
electromagnetic compaction
7. Effect of cerium ion implantation on the aqueous corrosion behavior
of zirconium
8. A method of as-cast crack prediction based upon numerical simulation
of solidification
9. The characteristics of microstructures and properties for advanced
aluminum/silicon contained hot-rolled trip steels
10. Recrystallization behavior and prior austenite grain boundary
corrosion in the plane strain compression condition for a low carbon
x70 pipeline steel
11. Micro-description of the solute-field and the phase-field model
for isothermal phase transition in binary alloys
12. Effects of test temperature and strain rate on the mechanical
properties in an intercritically heat-treated bainite-transformed
steel
13. Electropolymerization of aniline on zinc-electroplated steel from
neutral aqueous medium by single-step process
14. Semi-solid microstructure and its evolution of wrought aluminum
alloy by directly heating-isothermal treatment
15. Crystallographic analysis of the lath martensite transformation
in fe-ni-mn alloy
16. Effect of copper implantation on antibacterial activity of austenitic
stainless steel
17. A simulation study of deposition under two types of impinging
trajectories
18. Using high mg-content cored-wire to spheroidize and desulphurize
ductile iron melt in industrial experiments
19. Calculation of the vacancy volume of metals by modified brooks'
model
20. Electrochemical impedance spectroscopy during corrosion process
of 8090 al-li alloy in exco solution
21. Modeling of isothermal precipitation kinetics in hsla steels and
its application
22. Study of the x70 pipeline steel corroding in 3.0wt% nacl solution
using electrochemical impedance spectroscopy technique
23. Eis analysis on the anodic process of zinc in an alkaline solution
24. Hexahedral element refinement for the prediction-correction ale
fem simulation of 3d bulking forming process
25. Numerical simulation of induction skull melting process for titanium-aluminium
base alloy
26. Study on dynamic j-integral of mechanical heterogeneous welded
joint
27. The physical simulation on extrusion process of glass fiber composite
wire coated by lead
|
Click
here to order by e-mail
|
