|
Chinese Jouranl Of Mechanical Engineering
机械工程学报 (In English) Vol.12-1999
-------------------------------------------------------------
No.1
Study on mechanism of arc-excited
ultrasonic
Wu Minsheng et al （1）
Study on numerical simulation of mold-filling and solidification processes
of shaped casting
Xiong Shoumei et al （4）
Construction and modification of flexible feature-based models
He Siaozhao et al （11）
Optimal control of CNC cutting process
Wang Qiyi et at （18）
Study on thermodynamic model of a compressor with artificial neural networks
Ding Guoliang et at （23）
Solution for pressure distribution in squeeze film damper with electrohydraulic
active control
Li Yunhua et at （27）
Complex non-linear mathematical model for a kind of vehicle shock absorbers
Tan Runhua et al （32）
Study on metal transfer modes of self-shielded flux-cored welding wire
Li Zhuoxin et al （40）
Elasto-plastic FEM analysis of cylinder upsetting between two flat platens
Sun Huixue et at （45）
New multiobjective simulated annealing algorithm and its application to
turbine cascades'design
Tong Tong et al （50）
Mechanism analysis and mathematical description of mechanical abrupt faults
Chen Anhua et al （56）
Research on a magnetic field in electrolytic lapping
Chen Yuquan et al （63）
Test and study on the constitutive relationship of desert sand under moving
vehicle
Li Jie et al （70）
Gear position decision method of automated mechanical transmission based
on fuzzy inference
Qin Guihe et al （76）
No.2
Application of fuzzy mathematics in multi-objective optimal design
Chen Juhua 81
Controlled hot forming of retaining ring of generator
Zhang Qiaoli et al 87
Dynamic modelling of bar-gear mixed multibody systems using a specific
finite element method
Wang Yong et al 91
Collision-free motion planning of dual-arm
robot
Qian Donghai et al 98
Drive and control of virtual -axis NC machine tools
Zhou Kai et al 106
Enveloping theory based method for the determination of path interval
and tool path optimization for surface machining
Zhou Ji et al 112
Heat-spinning technology of harmonic gear-closed flexspline
Lu Xiuchun et al 118
A new modeling method for machine-foundation coupling system and its application
to the control of power flow
Xiong Yeping 123
A new algorithm for eliminating phase-shift error in phase shifting interferometry
Liu Chong et al 130
Study on the mechanism of chatter vibration of initial penetration in
drilling
Zhou Zhixiong et al 135
Study on the cutting temperature in gear hobbing
Liu Dawei et al 142
An exploitation of the expert system of mechanical design based on virtual
reality
Wu Qunbo et al 148
Experimental study on reducing adhesion in coal hopper by surface electro-osmosis
Ren Luquan et al 152
No.3
Typical two-stage servo-valves affected by
centrifugal force
He Yunbo et al(161)
Computer pan-vision theory and it's background
Zhuo Xiaojun et al(167)
Numerical modelling of the roll forming process of channel steel
Liu Cai et al(173)
Research on using parallel pipe to improve response capacity of electro-hydraulic
speed control system
Wu Xiaoming et al(178)
Power flow transmission of an asymmetrical flexible system excited by
an off-centre force
Song Kongjie et al(183)
Improving cutting tool reliability by proof test
Li Zhaoqian et al(188)
A simple nonlinear mathematical model for shock absorbers
Tan Runhua et al(193)
Theoretical model of dynamic characteristics of Audi 100 disc brake
Ren Luquan et al(199)
Numerical simulation on solidification process of horizontally continuously
cast round iron bars
Zhang Yunpeng et al(204)
Analysis of non-Nenwtonian plastic hydrodynamic lubrication during drawing
Liu Mingxia et al(211)
Adaptive state feedback controller with Kalman filter observer for machining
process
Liu Qiang et al(218)
Finite element dynamic analysis of spatial parallel mechanisms
Xia Fujie et al(224)
Study on a fine feed device and a tilting minute adjustable work-holder
for diamond cutting
Guo Yinbiao et al(230)
Identify the self-excited vibration of rolling mill drive trains in rolling
slippage
Wang Zhanghai et al(235)
No.4
Reverse engineering based on computer vision
for free-form surface
Lai Xinmin et al 241
A systematic architecture and modeling of virtual manufacturing and measuring
cell
Yao Yingxue et al 247
Cutting temperature of tempering bearing steel GCr15 cut by PCBN cutter
Liu Xianli et al 254
Load sharing and contact of hourglass worm gearing
Qin Datong et al 260
Calculation for deformation of the flexible guide on precision micropositioner Zhou
Mingbao 266
Finite element analysis of trasinent two-dimensional channel flow with
a sudden expansion
Gao Dianrong et al 270
Forced vibration and sound radiation of a rectangular plate with viscoelastic
boundary supports
Fan Zijie et al 276
Steering safety evaluation of driver-vehicle closed-loop system with random
road input
Zhao Youqun et al 282
Prediction and control of both wrinkle and fracture limits on cylindrical
cup multi-deep-drawing
Lei Junxiang et al 288
Forecast of breaking length of side curling short-spiral chips
Li Zhengjia et al 297
Feedback linearization control for electronically controllable clutch
of vehicle
Chen Li et al 303
Study on the optical flat profile high precision measuring technology
in the method of laser datum
Liu Haijiang et al 312
Application of vector rotating method in grinding involute worm with plane
envelope method
Shang Xiangdong et al 317
|
