|
***********************************************************************************
Acta
Mechanica Solida Sinica 2003
固体力学学报 （In Chinese , Quarterly)
***********************************************************************************
|
No.1
|
|
1.
Unconventional Gurtin-Type Variational Principles For Finite Deformation
Elastodynamics
2. Elastic Analysis Of A Screw Dislocation Inside A Circular Inhomogeneity
With An Interfacial Layer
3. A Numerical Simulation Of Magnetic Levitation Force For Superconductors
4. Torsional Vibrations Of A Rigid Disk Resting On Saturated Medium
With An Elastic Superstratum
5. Free Vibration Analysis Of Radial Pneumatic Tire Via Bezier Surface
6. Topology Optimization For Periodic Linear Elastic Microstructures
Of Composite Materials
7. Fatigue Residual Stiffness Degradation Model For Composite Laminates
8. Effects Of Piezoelectric Particle On The Three-Dimensional Crack-Tip
Stress Fields Of Near Crack
9. Reliability Sensitivity Analysis Of Single Degree-Of-Freedom Nonlinear
Vibration Systems With Random Parameters
Research Notes
10. The Nonlinear Dynamical Characteristics Of Ems Maglev Control
System With Two Suspensions
11. Three-Dimensional Solution For The Free Vibration Of Functionally
Gradient Piezoelectric Plates
12. Buckling Behaviour Investigation Of Composite Box-Like Structures
13. Fractal Two Level Fem For Acoustical Radiation Problems
14. Interaction Between Sh-Waves And Static Crack In Functionally
Grated Materials
15. Transient Thermal Shock Problem Of A Semi-Infinite Piezoelectric
Rod
16. Damping Characteristic Analysis Of Sma Damper And Method Of Device
Design
17. Application Of Endochronic Theory For Sheet Forming Instability
18. Bending Of Functionally Graded Shear-Deformable Rectangular Plates
Under Thermo-Mechanical Loads
19. Conference Information |
|
No.2
|
|
1.
Mixed Energy Method For Solution Of Quadratic Programming Problems
And Elastic-Plastic Analysis Of Truss Structures
2. A Micromechanical Method For Determining The Macroscopic Yield
Criterion Of Composites
3. Study Of Opcm Strain Gauges For Strain & Stress Measurement
In Orthotropic Material Structures
4. Optimum Design And Sensitivity Analysis Of Piezoelectric Intelligent
Trusses
5. Rigid-Flexible Coupling Dynamic Analysis Of Flexible Body
6. Visco-Plastic Constitutive Model For Uniaxial Ratcheting Of 304
Stainless Steel At Room Temperature
Research Notes
7. Fractal Characteristic Of Surface Short Fatigue Cracks At Elevated
Temperature
8. Chaotic Attitude Motion Of A Magnetic Rigid Spacecraft In An Elliptic
Orbit Near The Equatorial Plane Of The Earth
9. Reflection And Transmission Of Elastic Waves Propagating From A
Single-Phase Elastic Medium To A Transversely Isotropic Liquid-Saturated
Porous Medium
10. Variational Principle And Static-Dynamic Analysis For Viscoelastic
Timoshenko Beams
11. Study Of S-N And P-S-N Curves Of Hydraulic Concrete
12. HamiltonS Realization Of Second Order Birkhoff's System
13. A Numerical Method With High Accuracy For 3d Crack Problems
14. Simulation Of Material Surface Mechanical Properties Due To Laser
Treatment With Different Msz Coverage Rates
15. Standard Expression Of Engineering Mechanical Vectors And Invariance
Of Elastic Mechanics
16. Elastic-Plastic Fem Analysis For The Bar-Bar Tensile Impact Apparatus
With A Circumferentially Notched Short Metal Bar
17. A Practical Creep Compliance Model Of Asphalt Mixtures And Its
Application
18. An 8-Node Shell Element Of Relative Degrees Of Freedom With Hourglass
Control For Nonlinear Dynamic Analysis
19. Analysis Of Flow-Induced Random Response Of Internal Components
Of Nuclear Reactor |
|
No.3
|
|
1.
Dynamic Interaction Of Plane Waves With A Unilaterally Frictionally
Constrained Inclusion--Time Domain Boundary Element Analysis
2. Numerical Simulation Of Thermomechanical Fatigue Behavior Under
Strain Controlled Condition
3. Gurtin Variational Principle And Finite Element Simulation For
Dynamical Problems Of Fluid-Saturated Porous Media
4. Study On Flow-Induced Vibration For A Plate-Type Beam Structure
With Nonlinear Support
5. Researches On Stability Of Periodic Motion,Bifurcations And Chaos
In A Vibratory System With A Clearance Or Gap
6. Vibration Of Inhomogeneous Pile Embedded In Layered Soils With
General Voigt Models
7. Electric Energy Transmission Between Two Piezoelectric Transducers
8. Simulation Of Coarse-Grained Ly-12 Quasi-Superplastic Uniaxial
Tension
9. The Interaction Between A Broken Crack And The Interface Of A Bi-Material
Under Antiplane Loading
10. Robust And Adaptive Composite Control Of Coordiated Motion Of
Space-Based Manipulator System
11. Study On Bending-Torsional Coupled Vibration Of A Rotor With A
Switching Crack
12. Effects Of The Initial Shell Shape On The Forming Results Of Hydrobulging
Spherical Vessels
13. The Anti-Plane Problem Of Particle-Reinforced Composite Materials
With Doubly Periodic Elliptical Rigid Inclusions
14. Analysis Of Structural Nonlinear Damage Stochastic Evolution
15. Influence Of The Temperature On The Cavitation Instability Under
Plane Strain Condition
16. Efg Method Based On Precise Alogrithm In Time Domain And Its Application
In Viscoelastic Problems |
|
No.4
|
|
1.
A Semi-Analytical And Semi-Numerical Method For Solving 2-D Sound-Structure
Interaction Problems
2. An Analytical Solution Of One-Dimensional Finite Strain Consolidation
Theory
3. Nonlinear Dynamic Buckling Of Stiffened Plates Under In-Plane Impact
Loading
4. Discontinuous Galerkin Finite Element Method For Wave Propagation
Problems In Elasto-Plastic Continua
5. Buckling Analysis Of Composite Laminates With Built-In Circular
Or Elliptical Delaminations
6. An Effective Algorithm For Generalized Eigenvalue Problems
Research Notes
7. Derivative Recurrence Formulas Of The Element-Free Method For C1
Problems
8. Probabilistic Analysis Of Closed Loop Control System For Random
Piezoelectric Intelligent Truss Structural Dynamic Response
9. A Failure Model Of 3-D Braided Cmc's Flexture Fracture
10. An Analytical Solution Of A Solid Cylinder Subjected To Thermal
Shock Under Dynamic Thermoelastic Axisymmetric Plane Strain Condition
11. Dynamic Characteristics Of Lever-Type Multiple Tuned Mass Dampers
12. Analysis Of Zigzag Cracks In Rock-Like Materials Under Compression
13. A Modified Elasto-Plastic Large Deformable Dynamic Semi-Explicit
Method Based On The Iteration Of Velocity
14. A Coupled Precise And Finite Difference Time Integration Method
For Structural Dynamics
15. Analysis Of Nonlinear Dynamic Stability For Elastic Shaft-Disc
Rotating System With Unsymmetrical Viscoelastic Supported Condition
16. Study On The Drawing Process Of Steel Sheet With Electrodeposited
Nickel Coating
|
Click
here to order by E-mail
|
